ODAKE CT7011 rtv Silicone Adhesive Sealant

ODAKE CT7011 RTV Silicone Adhesive Sealant is a high-performance, room-temperature vulcanizing (RTV) silicone encapsulant specially formulated for the encapsulation and protection of LED soft strips and decorative LED lighting. This RTV silicone sealant provides superior sealing, waterproofing, and environmental protection, ensuring enhanced durability and reliable performance of LED components across diverse conditions.

Ideal for use in LED lighting assembly, ODAKE CT7011 helps extend the lifespan of LED products by safeguarding them against moisture, dust, and mechanical stress.

Features

Excellent Waterproof Performance
Efficient Heat Dissipation
High Light Transmission
UV Resistance
Quick Curing & Easy Application

Packing

A glue 20kg/barrel
B glue 2kg/barrel

Storage and shelf live

Store sealed below 25°C away from light. The shelf life is 6 months if unopened.

Usage and precautions

  1.  Mix glue A and glue B in a weight ratio of 10:1 and use after removing bubbles. It is best to exhaust before stirring to avoid too much air in the glue. To speed up the exhaust, stop stirring during the exhaust process and then exhaust again. Repeat this process two or three times;
  2.  Before filling the glue, the oil, dust and other impurities on the colloid should be thoroughly removed;
  3.  Curing conditions: room temperature curing, initial curing for 60-80 minutes, and complete curing for 24 hours.
  4.  The construction time after mixing glue A and glue B is 20-30 minutes, and it should be used up within half an hour.
  5.  After opening the AB glue, it should be sealed in time to avoid contact with water;
  6.  Open flames are strictly prohibited during construction. Keep ventilation during work and avoid wearing work clothes with static electricity.

ODAKE CT7011 RTV Silicone Adhesive Sealant is primarily used for the encapsulation of LED lights, ensuring both sealing and heat management. Its versatility makes it ideal for use in a wide range of applications:

LED Soft Strip Encapsulation
mid-crystal or solar cell modules.
Circuit Board Coating
Extensively used in gifts, LED lighting, handicrafts, electronics, toys, and many other industries.

            Product ModelCT7011
Glue AGlue B
Before curingAppearance: (transparent after mixing and curing)Transparent
Viscosity (25℃) mPa·s1090±10053±5

After curing

Hardness (25℃) Shore A24±2
Elongation at break (%)
Tensile strength (Mpa)≥0.8
Thermal conductivity (W/m.k)≤0.5
Volume resistivity (TΩ·m)1×1013
Breakdown strength (kv/mm)23

Disclaimer

The data provided in this document are representative values derived from actual measurements and routine testing. Hexu Xinwang assumes no responsibility for data obtained through unauthorized personnel or testing methods not approved by the company. Due to variations in application conditions, the above information should be adapted to the user’s specific circumstances. Hexu Xinwang accepts no liability for individual cases, including, but not limited to, any loss of profits.

Ask for Quote Now

We will arrange for a specialist to contact you immediately.