Adhesive Solutions
for New Energy Vehicles
With 15 years of experience in the R&D and manufacturing of adhesives, we provide customized bonding and sealing solutions—covering everything from cell structures, battery modules, and electronic control systems to charging piles, battery pack sealing, and inverter potting.
Power Battery System
Battery pack structures are complex, requiring a balance between lightweight design and structural integrity. CTP (Cell-to-Pack) and CTC (Cell-to-Chassis) configurations impose extremely high demands on cell thermal management. The enclosure must meet IP67-level waterproofing and sealing standards, while the design must also allow for disassembly and repair during the after-sales phase.
Solution: We offer a comprehensive product portfolio—covering everything from cell bonding and thermal potting to pack-frame sealing—that delivers both high thermal conductivity and superior toughness.
Pack-Frame Sealing: CT311 / CT533 (Alkoxy-cure silicone; features rapid curing, low VOC emissions, and excellent weather resistance.)
Structural Bonding (Cells to Enclosure): CT8262 / CT8262-L (Two-component polyurethane; 1:1 mix ratio; V-0 flame retardant; high strength. The “-L” variant offers high elongation of ≥120%.)
Thermal Bonding for Battery Packs: CT8592 Series (Two-component thermally conductive structural polyurethane adhesive; thermal conductivity: 0.8–2.0 W/m·K; bonding strength: ≥10 MPa.)
Thermal Management and Vibration Damping (Cells/Modules): CT6228-LW (Two-component thermally conductive gel; low-stress; minimal oil bleed; thermal conductivity: 2.0 W/m·K.)
Electronic Control and Inverter System
Inverters contain densely packed components that generate significant heat, requiring materials that are both thermally conductive and electrically insulating. Electronic components also need protection against vibration and moisture, while electromagnetic interference (EMI) can compromise system stability.
Solutions: We offer low-stress thermally conductive potting compounds, transparent silicone adhesives for component fixation, and high-efficiency electromagnetic shielding materials.
Inverter/Battery Potting: CT7612 / CT385 (Silicone potting compound series; thermal conductivity: 0.4–3.5 W/m·K; low viscosity for rapid air-bubble release; UL-certified).
Battery Cell Terminals/PCB Component Fixation: CT261 (Single-component transparent silicone; neutral, room-temperature curing; optically clear; provides insulation and moisture protection).
Inverter Thermal Interface: CT233 (Thermally conductive silicone grease series; thermal conductivity: 1.0–4.0 W/m·K; low volatility; high stability).
High-voltage charging pile
Charging guns and piles are frequently exposed to outdoor environments, requiring resistance to weather and aging, as well as the ability to withstand long-term immersion in water (IP67 rating). Sealing solutions for cable harnesses must be transparent, low-odor, and capable of rapid curing.
Solution: A transparent sealant with high elongation (≥400%), strong adhesion, and non-corrosive properties.
Cable harness sealing and bonding: CT753 (translucent paste; 10–15 minute tack-free time; elongation ≥400%; temperature resistance: -60°C to 200°C).
Waterproof sealing for charging guns/piles: CT752 / CT753 (gray/transparent paste; elongation up to 600%; IP67 waterproof rating; suitable for long-term water immersion).
Why choose ODAKE adhesive solutions?
15 years in the industry
A professional adhesive manufacturer integrating R&D, production, sales, and service, featuring a 2,000㎡ modern production facility.
Full-scenario matrix coverage
Customers avoid the need for complex material compatibility testing across multiple suppliers, as a single source can meet all their core adhesive requirements for the entire vehicle.
Deeply customized formula
We offer more than just standard products; we also provide custom solutions tailored to your specific processes.
Strict Environmental Compliance
Our entire product line complies with certifications such as RoHS, REACH, and VOC standards; furthermore, select products hold FDA food-grade and medical-grade certifications.
Hardcore Performance Metrics
Built to withstand harsh outdoor conditions, it provides all-weather protection and features exceptional UV resistance and durability against aging.
Extreme Weather Resistance
High-strength structure, efficient heat dissipation from battery cells, and compliance with the UL94 V-0 flame retardancy standard.
Dedicated Service Channel
We value every inquiry and challenge, and are fully committed to solving your adhesive-related problems. Your information is protected by a strict Non-Disclosure Agreement (NDA). The ODAKE engineering team is always at your service.
Retrieve TDS parameters
Apply for a free sample for testing
