ODAKE CT8272 is a premium, one-component anaerobic threadlocker specially formulated for securing and sealing high-strength threaded metal fasteners in critical applications. Designed with high viscosity for controlled application and gap-filling ability, CT8272 cures in the absence of air between tight-fitting metal surfaces, forming a durable, vibration-resistant bond that prevents loosening and leakage.
Engineered for performance in harsh environments, CT8272 provides exceptional chemical resistance and is well-suited for use in automotive, industrial, aerospace, and equipment manufacturing. Its non-toxic, solvent-free formulation meets global safety standards, offering a reliable solution where both performance and regulatory compliance are required.
Low odor
High bonding strength
Good sealing performance
High temperature and vibration resistance
Chemical resistance
50ML/stick
250ML/stick
Store in a cool, dry place away from direct sunlight . Unopened, can be stored for 12 months.
Surface Preparation – first, clean the screw surface thoroughly to remove oil, dust, and impurities.
Application – apply the adhesive evenly to the threads, then tighten the nut to the required torque.
Curing – allow the adhesive to cure for 1‑3 hours until it solidifies. For full strength, wait 24 hours before performing any destructive operations.
Storage – after use, tighten the bottle cap securely and store it in a cool, dry place.
Safety – keep this product out of reach of children.
ODAKE CT8272 is a high‑performance threadlocker designed to seal and lock bolts, nuts, and studs. It prevents loosening under vibration and thermal stress. Furthermore, it offers excellent heat and chemical resistance.
Typical Applications
Automotive fasteners – ensures secure locking in engine and chassis assemblies
Electrical and heavy industrial machinery – provides reliable sealing and vibration resistance in demanding equipment
Appliance assembly – prevents fasteners from loosening in household and commercial appliances
| Product Model | CT8272 |
| Main ingredients | Methacrylate |
| Appearance | Red liquid |
| Full solid time/h | 24h |
| Viscosity/mPas | 8000~12000 |
| Shear strength | > 25 N/mm |
| Release torque | > 23 N·m |
| Destructive torque/N.m | 23 Nm (M10) |
| Maximum filling gap/mm | 0.20 mm |
| Maximum thread diameter | M 36 |
| Working temperature (℃) | -55~200℃C |
| Certification | VOC / ROHS / REACH |
Disclaimer
The data provided in this document are representative values derived from actual measurements and routine testing. Hexu Xinwang assumes no responsibility for data obtained through unauthorized personnel or testing methods not approved by the company. Due to variations in application conditions, the above information should be adapted to the user’s specific circumstances. Hexu Xinwang accepts no liability for individual cases, including, but not limited to, any loss of profits.
📧 Mail：hexuxinwang@odakeglue.com
📞 Telephone：+86-769-81617120 | +86-13711910698
📍 Address：No. 23, Lane 12, Longyan East Road, Humen Town, Dongguan City, Guangdong Province
*We respect your confidentiality and all information is protected.
ODAKE is a trademark of Hexun Xinwang Adhesive.
We will arrange for a specialist to contact you immediately.
